Shopping on line can be easy, simple and save you lots of money. It can also take a lot of your time, frustrate you, and result in unwanted purchases. Now the same can be said for regular high street shopping, but with the vast opportunity presented by the Internet it will pay you to spend a few minutes reading this and understanding how to better optimize your Instrument Landing System shopping experience:

1. Compare - without doubt the biggest advantage that the Instrument Landing System offers shoppers today is the ability to compare thousands of Instrument Landing System at a time. This is a great thing, but not necessarily all the time! Too much can be daunting at times so take advantage of the great comparison sites and where possible let them do the hard work for you.

2. Research - if it has been said it will be on the internet. Ignorance is no longer a justifiable reason for buying the wrong thing. Take the time to research in detail everything that you could possible want to know about

3. Testimonials - don't know anybody that has bought a Instrument Landing System? Wrong! If the Instrument Landing System is good the internet will let you know. Use the Internet as a friend and get testimonials before you buy.

4. Questions - Got a question about Instrument Landing System then search the Forums, FAQ's, Blogs etc. Don't be afraid to ask .....

5. Reputation - Never heard of the company selling Instrument Landing System? Don't worry, no reason why you should know every company in the world, but you know someone that does! Use the internet to find out what people are saying about Instrument Landing System and build up a picture of their reputation for sales, returns, customer service, delivery etc.

6. Returns - still worried that even after all of the above your Instrument Landing System wont be what you want? Check out the returns policy. There is so much competition now that someone, somewhere is bound to offer the terms that you are comfortable with.

7. Feedback - happy with your Instrument Landing System then let people know, after all you are depending on others people input in your buying decision, so why not give a little back.

8. Security - check for the yellow padlock on the Instrument Landing System site before you buy, and the s after http:/ /i.e. https:// = a secure site

9. Contact - got a question about Instrument Landing System, or want to leave a comment then check out the sites contact page. Reputable companies have them and respond.

10. Payment - ready to pay for your Instrument Landing System, then use your credit card or PayPal! Be aware of companies that don't accept them, there may be genuine reasons but given the huge amount of choice you have when buying online there is no reason at all not to buy via credit card or PayPal.

in Hanover, Germany.The Instrument landing system (ILS) is a ground-based instrument approach system which provides precise guidance to an aircraft approaching a runway, using a combination of radio signals and, in many cases, high-intensity lighting arrays to enable a safe landing during Instrument meteorological conditions, such as low Flight ceiling or reduced visibility due to fog, rain, or blowing snow.

Instrument Approach Procedure charts (or "approach plates") are published for each ILS, providing pilots with the needed information to fly an ILS approach during Instrument flight rules operations, including the radio frequencies used by the ILS components or navaids and the minimum visibility requirements prescribed for the specific ILS.

Principle of operation An ILS consists of two independent sub-systems, one providing lateral guidance (Localizer), the other vertical guidance (Glideslope or Glide Path) to aircraft approaching a runway. Aircraft guidance is provided by the ILS receivers in the aircraft by performing a modulation depth comparison. The ILS has also been referred to as a Modulation Depth Comparison Navigational Aid or MDCNA.



A localizer (LOC, or LLZ in Europe) antenna (radio) phased array is normally located beyond the departure end of the runway and generally consists of several pairs of directional antennas. Two signals are transmitted on a carrier frequency between 108.10 MHz and 111.975 MHz. One is Amplitude modulation at 90 Hz, the other at 150 Hz and these are transmitted from separate but co-located antennas. Each antenna transmits a fairly narrow beam, one slightly to the left of the runway centerline, the other to the right.

The localizer Receiver (radio) on the aircraft measures the Difference in the Depth of Modulation (DDM) of the 90 Hz and 150 Hz signals. For the localizer, the depth of modulation for each of the modulating frequencies is 20 percent. The difference between the two signals varies depending on the position of the approaching aircraft from the centerline.

If there is a predominance of either 90Hz or 150Hz modulation, the aircraft is off the centerline. In the cockpit, the needle on the Horizontal Situation Indicator, or HSI (The Instrument part of the ILS), or CDI (Course deviation indicator), will show that the aircraft needs to fly left or right to correct the positional error to fly down the center of the runway. If the DDM is zero the receiver aerial and therefore, the aircraft, is on the centerline of the localizer coinciding with the physical runway centerline.

A glideslope or Glidepath (GP) antenna array is sited to one side of the runway touchdown zone. The GP signal is transmitted on a carrier frequency between 329.15 and 335 MHz using a technique similar to that of the localizer. The centerline of the glideslope signal is arranged to define a glideslope of approximately 3° above horizontal (ground level).

Localizer and glideslope carrier frequencies are paired so that only one selection is required to tune both receivers.

These signals are displayed on an instrument in the cockpit. The pilot controls the aircraft so that the indications on the instrument remain centered on the display. This ensures the aircraft is following the ILS centreline. Some aircraft possess the ability to route signals into the autopilot, which allows the approach to be flown automatically by the autopilot.

Localizer , Johnson County, Missouri, Missouri.In addition to the previously mentioned navigational signals, the localizer provides for ILS facility identification by periodically transmitting a 1020 Hz morse code identification signal. For example, the ILS for runway 04R at John F. Kennedy International Airport transmits IJFK to identify itself to users whereas runway 04L is known as IHIQ. This lets users know the facility is operating normally and that they are tuned to the correct ILS. The glideslope transmits no identification signal and therefore airborne ILS equipment relies on the localizer for identification.

Modern localizer antennas are highly Directional antenna. However, usage of older, less directional antennas allows a runway to have a non-precision approach called a localizer back course. This lets aircraft land using the signal transmitted from the back of the localizer array. This signal is reverse sensing so a pilot may have to fly opposite the needle indication (depending on the equipment installed in the aircraft). Highly directional antennas do not provide a sufficient signal to support a backcourse. In the United States, backcourse approaches are commonly associated with Category I systems at smaller airports that do not have an ILS on both ends of the primary runway.

Marker beacons of Beijing Capital International Airport Instrument Landing System Runway36LOn most installations marker beacons operating at a carrier frequency of 75 MHz are provided. When the transmission from a marker beacon is received it activates an indicator on the pilot's instrument panel and the modulating tone of the beacon is audible to the pilot. The correct height the aircraft should be at when the signal is received in an aircraft is promulgated.

Outer marker The outer marker should be located 7.2 km (3.9 nautical mile) from the threshold except that, where this distance is not practicable, the outer marker may be located between 6.5 and 11.1 km (3.5 and 6 NM) from the threshold. The modulation is repeated Morse-style dashes of a 400 Hz tone. The cockpit indicator is a blue lamp that flashes in unison with the received audio code. The purpose of this beacon is to provide height, distance and equipment functioning checks to aircraft on intermediate and final approach. In the United States, an Non-directional beacon is often combined with the outer marker beacon in the ILS approach (called a Locator Outer Marker, or LOM); in Canada, low-powered NDBs have replaced marker beacons entirely.

Middle marker The middle marker should be located so as to indicate, in low visibility conditions, the missed approach point, and the point that visual contact with the runway is imminent, Ideally at a distance of 1050m from the threshold. It is modulated with a 1300 Hz tone as alternating dots and dashes. The cockpit indicator is an Amber (color) lamp that flashes in unison with the received audio code.

Inner marker The inner marker, when installed, shall be located so as to indicate in low visibility conditionsthe imminence of arrival at the runway threshold. This is typically the position of an aircraft on the ILS as it reaches Category II minima. The modulation is Morse-style dots at 3000Hz. The cockpit indicator is a White#White light lamp that flashes in unison with the received audio code.

DME Distance Measuring Equipment (DME), as well as GPS, is replacing markers in many installations. This provides more accurate and continuous monitoring of correct progress on the ILS to the pilot, and does not require an installation outside the airport boundary. The DME is frequency paired with the ILS so that it is automatically selected when the ILS is tuned.It gives pilots a slant range measurement of distance to the runway in nautical miles.It is used in many Cases

Monitoring It is essential that any failure of the ILS to provide safe guidance is detected immediately by the pilot. To achieve this, monitors continually assess the vital characteristics of the transmissions. If any significant deviation beyond strict limits is detected, either the ILS is automatically switched off or the navigation and identification components are removed from the carrier. Either of these actions will activate an indication ('failure flag') on the instruments of an aircraft using the ILS.

Approach lighting Some installations include medium or high intensity approach light systems. Most often, these are at larger airports. The Approach Lighting System (abbreviated ALS) assists the pilot in transitioning from instrument to visual flight, and to align the aircraft visually with the runway centerline. At many non-towered airports, the intensity of the lighting system can be Pilot Controlled Lighting.

Use of the Instrument Landing System At large airports, air traffic control will direct aircraft to the localizer via assigned headings, making sure aircraft do not get too close to each other (maintain separation), but also avoiding delay as much as possible. Several aircraft can be on the ILS at the same time, several miles apart. An aircraft that has intercepted both the localizer and the glideslope signal is said to be established on the approach. Typically, an aircraft will be established by 6 nautical miles from the runway, or just after reaching the Final Approach Fix.

Aircraft deviation from the optimal path is indicated to the flight crew by means of display with "needles" (a carry over from when an analog meter movement would indicate deviation form the course line via voltages sent from the ILS receiver).

The output from the ILS receiver goes both to the display system (Head Down Display and Head-Up Display if installed) and can also go to the Flight Control Computer. An aircraft landing procedure can be either "coupled", where the Flight Control Computer directly flies the aircraft and the flight crew monitor the operation; or "uncoupled" (manual) where the flight crew fly the aircraft uses the HUD and manually control the aircraft to minimize the deviation from flight path to the runway centreline.

Decision Altitude/Height Once established on an approach, the Autoland system or pilot will follow the ILS and descend along the glideslope, until the Decision Altitude is reached (for a typical Category I ILS, this altitude is 200 Foot (unit of length) above the runway). At this point, the pilot must have the runway or its Approach Lighting System in sight to continue the approach.

If neither can be seen, the approach must be aborted and a missed approach procedure will be performed. This is where the aircraft will climb back to a predetermined altitude. From there the pilot will either try the same approach again or divert to another airport.

Aborting the approach (as well as the ATC instruction to do so) is called executing a missed approach.

ILS categories There are three categories of ILS which support similarly named categories of operation.

In each case a suitably equipped aircraft and appropriately qualified crew are required. For example, Cat IIIc a fail-operational system is required, Cat I does not. A Head-Up Display which allows the pilot to perform aircraft maneuvers rather than an automatic system is considered as fail-operational. Cat I relies only on altimeter indications for decision height, whereas Cat II and Cat III approaches use radar altimeter to determine decision height.

(Reference ICAO Annex 10 AERONAUTICAL TELECOMMUNICATIONS Volume 1 RADIO NAVIGATION AIDS 2.1.1)

An ILS is required to shut down upon internal detection of a fault condition as mentioned in the monitoring section. With the increasing categories, ILS equipment is required to shut down faster since higher categories require shorter response times. For example, a Cat I localizer must shutdown within 10 seconds of detecting a fault, but a Cat III localizer must shut down in less than 2 seconds.

Limitations and alternatives in Hanover, Germany.Due to the complexity of ILS localizer and glideslope systems, there are some limitations. Localizer systems are sensitive to obstructions in the signal broadcast area like large buildings or hangars. Glideslope systems are also limited by the terrain in front of the glideslope antennas. If terrain is sloping or uneven, reflections can create an uneven glidepath causing unwanted needle deflections. Additionally, since the ILS signals are pointed in one direction by the positioning of the arrays, ILS only supports straight in approaches. Installation of ILS can also be costly due to the complexity of the antenna system and siting criteria.

In the 1970s there was a major US & European effort to establish the Microwave Landing System, which are not similarly limited and which allow curved approaches. However, a combination of slow development, airline reluctance to invest in MLS, and the rise of Global Positioning System has resulted in its failure to be widely adopted. The Transponder Landing System (TLS) is another alternative to an ILS that can be used where a conventional ILS will not work or is not cost-effective.

History Tests of the ILS system began in 1929, and the Civil Aeronautics Administration (CAA) authorized installation of the system in 1941 at six locations. The first landing of a scheduled U.S. passenger airliner using ILS was on January 26, 1938, as a Pennsylvania-Central Airlines Boeing 247-D flew from Washington, D.C., to Pittsburgh and landed in a snowstorm using only the Instrument Landing System.

Future The advent of the Global Positioning System (GPS) provides an alternative source of guidance for aircraft. The Wide Area Augmentation System (WAAS) will provide guidance to Category I standards beginning 2007. Other methods of augmentation are in development to provide for Category III minimums or better, such as the Local Area Augmentation System (LAAS).

See also

Notes -->}

References

External links

in Hanover, Germany.The Instrument landing system (ILS) is a ground-based instrument approach system which provides precise guidance to an aircraft approaching a runway, using a combination of radio signals and, in many cases, high-intensity lighting arrays to enable a safe landing during Instrument meteorological conditions, such as low Flight ceiling or reduced visibility due to fog, rain, or blowing snow.

Instrument Approach Procedure charts (or "approach plates") are published for each ILS, providing pilots with the needed information to fly an ILS approach during Instrument flight rules operations, including the radio frequencies used by the ILS components or navaids and the minimum visibility requirements prescribed for the specific ILS.

Principle of operation An ILS consists of two independent sub-systems, one providing lateral guidance (Localizer), the other vertical guidance (Glideslope or Glide Path) to aircraft approaching a runway. Aircraft guidance is provided by the ILS receivers in the aircraft by performing a modulation depth comparison. The ILS has also been referred to as a Modulation Depth Comparison Navigational Aid or MDCNA.



A localizer (LOC, or LLZ in Europe) antenna (radio) phased array is normally located beyond the departure end of the runway and generally consists of several pairs of directional antennas. Two signals are transmitted on a carrier frequency between 108.10 MHz and 111.975 MHz. One is Amplitude modulation at 90 Hz, the other at 150 Hz and these are transmitted from separate but co-located antennas. Each antenna transmits a fairly narrow beam, one slightly to the left of the runway centerline, the other to the right.

The localizer Receiver (radio) on the aircraft measures the Difference in the Depth of Modulation (DDM) of the 90 Hz and 150 Hz signals. For the localizer, the depth of modulation for each of the modulating frequencies is 20 percent. The difference between the two signals varies depending on the position of the approaching aircraft from the centerline.

If there is a predominance of either 90Hz or 150Hz modulation, the aircraft is off the centerline. In the cockpit, the needle on the Horizontal Situation Indicator, or HSI (The Instrument part of the ILS), or CDI (Course deviation indicator), will show that the aircraft needs to fly left or right to correct the positional error to fly down the center of the runway. If the DDM is zero the receiver aerial and therefore, the aircraft, is on the centerline of the localizer coinciding with the physical runway centerline.

A glideslope or Glidepath (GP) antenna array is sited to one side of the runway touchdown zone. The GP signal is transmitted on a carrier frequency between 329.15 and 335 MHz using a technique similar to that of the localizer. The centerline of the glideslope signal is arranged to define a glideslope of approximately 3° above horizontal (ground level).

Localizer and glideslope carrier frequencies are paired so that only one selection is required to tune both receivers.

These signals are displayed on an instrument in the cockpit. The pilot controls the aircraft so that the indications on the instrument remain centered on the display. This ensures the aircraft is following the ILS centreline. Some aircraft possess the ability to route signals into the autopilot, which allows the approach to be flown automatically by the autopilot.

Localizer , Johnson County, Missouri, Missouri.In addition to the previously mentioned navigational signals, the localizer provides for ILS facility identification by periodically transmitting a 1020 Hz morse code identification signal. For example, the ILS for runway 04R at John F. Kennedy International Airport transmits IJFK to identify itself to users whereas runway 04L is known as IHIQ. This lets users know the facility is operating normally and that they are tuned to the correct ILS. The glideslope transmits no identification signal and therefore airborne ILS equipment relies on the localizer for identification.

Modern localizer antennas are highly Directional antenna. However, usage of older, less directional antennas allows a runway to have a non-precision approach called a localizer back course. This lets aircraft land using the signal transmitted from the back of the localizer array. This signal is reverse sensing so a pilot may have to fly opposite the needle indication (depending on the equipment installed in the aircraft). Highly directional antennas do not provide a sufficient signal to support a backcourse. In the United States, backcourse approaches are commonly associated with Category I systems at smaller airports that do not have an ILS on both ends of the primary runway.

Marker beacons of Beijing Capital International Airport Instrument Landing System Runway36LOn most installations marker beacons operating at a carrier frequency of 75 MHz are provided. When the transmission from a marker beacon is received it activates an indicator on the pilot's instrument panel and the modulating tone of the beacon is audible to the pilot. The correct height the aircraft should be at when the signal is received in an aircraft is promulgated.

Outer marker The outer marker should be located 7.2 km (3.9 nautical mile) from the threshold except that, where this distance is not practicable, the outer marker may be located between 6.5 and 11.1 km (3.5 and 6 NM) from the threshold. The modulation is repeated Morse-style dashes of a 400 Hz tone. The cockpit indicator is a blue lamp that flashes in unison with the received audio code. The purpose of this beacon is to provide height, distance and equipment functioning checks to aircraft on intermediate and final approach. In the United States, an Non-directional beacon is often combined with the outer marker beacon in the ILS approach (called a Locator Outer Marker, or LOM); in Canada, low-powered NDBs have replaced marker beacons entirely.

Middle marker The middle marker should be located so as to indicate, in low visibility conditions, the missed approach point, and the point that visual contact with the runway is imminent, Ideally at a distance of 1050m from the threshold. It is modulated with a 1300 Hz tone as alternating dots and dashes. The cockpit indicator is an Amber (color) lamp that flashes in unison with the received audio code.

Inner marker The inner marker, when installed, shall be located so as to indicate in low visibility conditionsthe imminence of arrival at the runway threshold. This is typically the position of an aircraft on the ILS as it reaches Category II minima. The modulation is Morse-style dots at 3000Hz. The cockpit indicator is a White#White light lamp that flashes in unison with the received audio code.

DME Distance Measuring Equipment (DME), as well as GPS, is replacing markers in many installations. This provides more accurate and continuous monitoring of correct progress on the ILS to the pilot, and does not require an installation outside the airport boundary. The DME is frequency paired with the ILS so that it is automatically selected when the ILS is tuned.It gives pilots a slant range measurement of distance to the runway in nautical miles.It is used in many Cases

Monitoring It is essential that any failure of the ILS to provide safe guidance is detected immediately by the pilot. To achieve this, monitors continually assess the vital characteristics of the transmissions. If any significant deviation beyond strict limits is detected, either the ILS is automatically switched off or the navigation and identification components are removed from the carrier. Either of these actions will activate an indication ('failure flag') on the instruments of an aircraft using the ILS.

Approach lighting Some installations include medium or high intensity approach light systems. Most often, these are at larger airports. The Approach Lighting System (abbreviated ALS) assists the pilot in transitioning from instrument to visual flight, and to align the aircraft visually with the runway centerline. At many non-towered airports, the intensity of the lighting system can be Pilot Controlled Lighting.

Use of the Instrument Landing System At large airports, air traffic control will direct aircraft to the localizer via assigned headings, making sure aircraft do not get too close to each other (maintain separation), but also avoiding delay as much as possible. Several aircraft can be on the ILS at the same time, several miles apart. An aircraft that has intercepted both the localizer and the glideslope signal is said to be established on the approach. Typically, an aircraft will be established by 6 nautical miles from the runway, or just after reaching the Final Approach Fix.

Aircraft deviation from the optimal path is indicated to the flight crew by means of display with "needles" (a carry over from when an analog meter movement would indicate deviation form the course line via voltages sent from the ILS receiver).

The output from the ILS receiver goes both to the display system (Head Down Display and Head-Up Display if installed) and can also go to the Flight Control Computer. An aircraft landing procedure can be either "coupled", where the Flight Control Computer directly flies the aircraft and the flight crew monitor the operation; or "uncoupled" (manual) where the flight crew fly the aircraft uses the HUD and manually control the aircraft to minimize the deviation from flight path to the runway centreline.

Decision Altitude/Height Once established on an approach, the Autoland system or pilot will follow the ILS and descend along the glideslope, until the Decision Altitude is reached (for a typical Category I ILS, this altitude is 200 Foot (unit of length) above the runway). At this point, the pilot must have the runway or its Approach Lighting System in sight to continue the approach.

If neither can be seen, the approach must be aborted and a missed approach procedure will be performed. This is where the aircraft will climb back to a predetermined altitude. From there the pilot will either try the same approach again or divert to another airport.

Aborting the approach (as well as the ATC instruction to do so) is called executing a missed approach.

ILS categories There are three categories of ILS which support similarly named categories of operation.

In each case a suitably equipped aircraft and appropriately qualified crew are required. For example, Cat IIIc a fail-operational system is required, Cat I does not. A Head-Up Display which allows the pilot to perform aircraft maneuvers rather than an automatic system is considered as fail-operational. Cat I relies only on altimeter indications for decision height, whereas Cat II and Cat III approaches use radar altimeter to determine decision height.

(Reference ICAO Annex 10 AERONAUTICAL TELECOMMUNICATIONS Volume 1 RADIO NAVIGATION AIDS 2.1.1)

An ILS is required to shut down upon internal detection of a fault condition as mentioned in the monitoring section. With the increasing categories, ILS equipment is required to shut down faster since higher categories require shorter response times. For example, a Cat I localizer must shutdown within 10 seconds of detecting a fault, but a Cat III localizer must shut down in less than 2 seconds.

Limitations and alternatives in Hanover, Germany.Due to the complexity of ILS localizer and glideslope systems, there are some limitations. Localizer systems are sensitive to obstructions in the signal broadcast area like large buildings or hangars. Glideslope systems are also limited by the terrain in front of the glideslope antennas. If terrain is sloping or uneven, reflections can create an uneven glidepath causing unwanted needle deflections. Additionally, since the ILS signals are pointed in one direction by the positioning of the arrays, ILS only supports straight in approaches. Installation of ILS can also be costly due to the complexity of the antenna system and siting criteria.

In the 1970s there was a major US & European effort to establish the Microwave Landing System, which are not similarly limited and which allow curved approaches. However, a combination of slow development, airline reluctance to invest in MLS, and the rise of Global Positioning System has resulted in its failure to be widely adopted. The Transponder Landing System (TLS) is another alternative to an ILS that can be used where a conventional ILS will not work or is not cost-effective.

History Tests of the ILS system began in 1929, and the Civil Aeronautics Administration (CAA) authorized installation of the system in 1941 at six locations. The first landing of a scheduled U.S. passenger airliner using ILS was on January 26, 1938, as a Pennsylvania-Central Airlines Boeing 247-D flew from Washington, D.C., to Pittsburgh and landed in a snowstorm using only the Instrument Landing System.

Future The advent of the Global Positioning System (GPS) provides an alternative source of guidance for aircraft. The Wide Area Augmentation System (WAAS) will provide guidance to Category I standards beginning 2007. Other methods of augmentation are in development to provide for Category III minimums or better, such as the Local Area Augmentation System (LAAS).

See also

Notes -->}

References

External links



 

Instrument Landing System



 
Copyright © 2008 Hintcenter.com - All rights reserved.
Home | Terms of Use | Privacy Policy
All Trademarks belong to their repective owners. Many aspects of this page are used under
commercial commons license from Yahoo!